Samsung dishwashers are equipped with error codes that help users diagnose and fix various issues. These error codes appear on the display and are typically alphanumeric, combining letters and numbers to signify specific problems. Here’s an overview of some common Samsung dishwasher error codes and their corresponding solutions:
1. Error Code 1E (or IE) – Water Supply Error
- Cause: This error indicates that the dishwasher is not receiving water, or there is insufficient water flow.
- Solution: Ensure that the water supply valve is fully open. Check the water inlet hose for kinks or blockages and ensure the inlet filter isn’t clogged. If the problem persists, the water inlet valve may need replacement.
2. Error Code 3E – Pump Operation Error
- Cause: This error occurs when the pump does not work properly, preventing water from circulating within the dishwasher.
- Solution: Check the circulation pump and drain pump for any obstructions or damages. Clean the filters and remove any debris. If the pump is faulty, it might need to be replaced.
3. Error Code 4E (or 4C) – Water Supply Error
- Cause: Similar to 1E, this error occurs when the dishwasher does not receive the correct amount of water.
- Solution: Check if the water supply line is properly connected and that there are no blockages. Verify that the water pressure is adequate. If the issue persists, it may involve a malfunctioning water inlet valve, which could need replacement.
4. Error Code 5E (or SE) – Drainage Error
- Cause: This indicates a problem with draining the water from the dishwasher.
- Solution: Check the drain hose for blockages or kinks. Clean the filter and check if the drain pump is functioning properly. If necessary, the drain pump may need to be replaced.
Read also How Custom Software Solutions Can Boost Your Business Growth
5. Error Code LE (or LC) – Leakage Error
- Cause: This error occurs when the dishwasher detects a water leak or excessive moisture inside the unit.
- Solution: Inspect the dishwasher for leaks. Check the door seals, water hoses, and the base of the dishwasher for any signs of water. If a leak is found, repair or replace the affected parts. If no visible leak is detected, the sensor itself might be faulty and may need replacement.
6. Error Code HE – Heater Error
- Cause: This error indicates a problem with the dishwasher’s heating element.
- Solution: Check if the heating element is functioning correctly. If it’s not heating the water properly, the element might need to be replaced. Also, ensure that the temperature sensor is working correctly.
7. Error Code bE – Button Error
- Cause: This error is related to a stuck button on the control panel.
- Solution: Inspect the control panel and ensure no buttons are stuck. If a button is malfunctioning, cleaning or replacing the control panel might be necessary.
8. Error Code tE – Temperature Sensor Error
- Cause: The temperature sensor is malfunctioning or has detected an abnormal temperature.
- Solution: Check the temperature sensor and wiring. If the sensor is defective, it should be replaced.
9. Error Code oE – Overflow Error
- Cause: This error happens when the dishwasher overfills with water.
- Solution: Check the water inlet valve and float switch for proper operation. Ensure that the dishwasher is level and not tilted forward. If necessary, replace the faulty parts.
These error codes are designed to provide guidance on troubleshooting. For safety reasons, if you are unsure or uncomfortable with handling any components, it is always recommended to contact a professional technician to diagnose and repair the appliance.
